產品介紹：

循環時間業內最快，生產效率具有壓倒性優勢

切線后無需進行再處理

為使余線長度最短，采用了專用的移動刀和固定刀，并將固定刀配置在靠近布料的位置。切線后，線頭余線長度為2~5mm，無需再進行摘線工序。

Product Introduction：

Quickest circulation time in the industry,higher production effciency

Max Sewing speed 3200rpm(JM-438D) further enhanced production efficiency easy and exact orientation of sewing material, presser foot device controlled bu impulse motor, and height of presser foot set lor 2 stages to achieve easy sewing malerial orienlaslion and reduced set time, and press operating padel slightly, its response is very good and noise is much more reduced as well.

Unnecessary to redo
After being cut in orde to get shortest end of thread , special moving knife and fixed knife are applied , and put the fixed knile be aside sewing material.
After being cut, end of thread is of 2-2.5mm lenglh and unnecessary to redo it.